Sony PCV-RX270DS Manual de usuario descargar pdf (Pagina 39)

Removing, Installing, and Replacing Components

Removing an Add-in Card

Remove the side cover (see “Removing the Side Cover” on page 22).

Disconnect any cables attached to the add-in card you want to

remove.

Remove the screw that secures the add-in card to the chassis.

Remove the add-in card from the PCI slot connector and store the

card in an anti-static wrapper for future use.

Before opening the system unit, save any open files, exit Windows, turn off

the power of the computer and all attached peripherals, and then unplug the

power cord.

✍

Grasp the card with one hand on each end, and gently pull up as you rock the card

from side to side.

Hold the add-in card by its edges and do not touch any components or

connector contacts on the card. Static electricity in your body may

damage sensitive components on the card. As a precaution, touch any

exposed metal part on the metal chassis (preferably the metal part on

the power supply) before handling an add-in card to discharge any static

electricity in your body.

KY0071.VSD

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 117 118

Sin comentarios

Sony PCV-RX270DS Manual de usuario Pagina 39